============================================================
Clipper Change Log
============================================================

v4.6.3 - 11 November 2011
* Bugfix: Fixed another minor mitering bug in OffsetPolygons.

v4.6.2 - 10 November 2011
* Bugfix: Fixed a rare bug in the orientation of polygons 
  returned by Clipper's Execute() method.
* Bugfix: Previous update introduced a mitering bug in the
  OffsetPolygons function.

v4.6 - 29 October 2011
* Added: Support for Positive and Negative polygon fill 
  types (in addition to the EvenOdd and NonZero fill types).
* Bugfix: The OffsetPolygons function was generating the 
  occasional artefact when 'shrinking' polygons.

v4.5.5 - 8 October 2011
* Bugfix: Fixed an obscure bug in Clipper's JoinCommonEdges 
  method. 
* Update: Replaced IsClockwise function with Orientation 
  function. The orientation issues affecting OffsetPolygons 
  should now be finally resolved.
* Change: The Area function once again returns a signed value.
 
v4.5.1 - 28 September 2011
* Deleted: The UseFullCoordinateRange property has been 
  deleted since integer range is now managed implicitly. 
* BugFix: Minor bug in OffsetPolygon mitering. 
* Change: C# JoinType enum moved from Clipper class to 
  ClipperLib namespace. 
* Change: The Area function now returns the absolute area 
  (irrespective of orientation). 
* Change: The IsClockwise function now requires a second 
  parameter - YAxisPositiveUpward - to accommodate displays 
  with Y-axis oriented in either direction

v4.4.4 - 10 September 2011
* Change: Deleted jtButt from JoinType (used by the 
  OffsetPolygons function). 
* BugFix: Fixed another minor bug in OffsetPolygons function. 
* Update: Further improvements to the help file

v4.4.3 - 29 August 2011
* BugFix: fixed a minor rounding issue in OffsetPolygons 
  function (affected C++ & C# translations). 
* BugFix: fixed a minor bug in OffsetPolygons' function 
  declaration (affected C++ translation only). 
* Change: 'clipper' namespace changed to 'ClipperLib' 
  namespace in both C++ and C# code to remove the ambiguity 
  between the Clipper class and the namespace. (This also 
  required numerous updates to the accompanying demos.)

v4.4.2 - 26 August 2011
* BugFix: minor bugfixes in Clipper. 
* Update: the OffsetPolygons function has been significantly 
  improved by offering 4 different join styles. 

v4.4.0 - 6 August 2011
* BugFix: A number of minor bugs have been fixed that mostly 
  affected the new ExPolygons structure. 

v4.3.0 - 17 June 2011
* New: ExPolygons structure that explicitly associates 'hole' 
  polygons with their 'outer' container polygons.
* New: Execute method overloaded so the solution parameter 
  can now be either Polygons or ExPolygons.  
* BugFix: Fixed a rare bug in solution polygons orientation. 

v4.2.8 - 21 May 2011
* Update: JoinCommonEdges() improved once more. 
* BugFix: Several minor bugs fixed. 

v4.2.6 - 1 May 2011
* Bugfix: minor bug in SlopesEqual function.
* Update: Merging of output polygons sharing common edges 
  has been significantly inproved

v4.2.4 - 26 April 2011
Input polygon coordinates can now contain the full range of 
signed 64bit integers (ie +/-9,223,372,036,854,775,807). This 
means that floating point values can be converted to and from 
Clipper's 64bit integer coordinates structure (IntPoint) and  
still retain a precision of up to 18 decimal places. However, 
since the large-integer math that supports this expanded range 
imposes a small cost on performance (~15%), a new property 
UseFullCoordinateRange has been added to the Clipper class to 
allow users the choice of whether or not to use this expanded 
coordinate range. If this property is disabled, coordinate values 
are restricted to +/-1,500,000,000.

v4.2 - 12 April 2011
JoinCommonEdges() code significantly improved plus other minor 
improvements.

v4.1.2 - 9 April 2011
* Update: Minor code tidy. 
* Bugfix: Possible endless loop in JoinCommonEdges() in clipper.pas.

v4.1.1 - 8 April 2011
* Update: All polygon coordinates are now stored as 64bit integers
  (though they're still restricted to range -1.5e9 to +1.5e9 pending 
  the inclusion of code supporting 64bit math).
* Change: AddPolygon and AddPolygons methods now return boolean 
  values. 
* Bugfix: Bug in JoinCommonEdges() caused potential endless loop. 
* Bugfix: Bug in IsClockwise(). (C++ code only)

v4.0 - 5 April 2011
* Clipper 4 is a major rewrite of earlier versions. The biggest 
  change is that floating point values are no longer used, 
  except for the storing of edge slope values. The main benefit 
  of this is the issue of numerical robustness has been 
  addressed. Due to other major code improvements Clipper v4 
  is approximately 40% faster than Clipper v3. 
* The AddPolyPolygon method has been renamed to AddPolygons. 
* The IgnoreOrientation property has been removed. 
* The clipper_misc library has been merged back into the 
  main clipper library.
  
v3.1.0 - 17 February 2011
* Bugfix: Obscure bug in TClipperBase.SetDx method that caused 
  problems with very small edges ( edges <1/1000th pixel in size).
  
v3.0.3 - 9 February 2011
* Bugfix: Significant bug, but only in C# code.
* Update: Minor refactoring.

v3.0 - 31 January 2011
* Update: Major rewrite of the portion of code that calculates 
  the output polygons' orientation.
* Update: Help file significantly improved.
* Change: Renamed ForceOrientation property to IgnoreOrientation. 
  If the orientation of output polygons is not important, or can 
  be managed separately, clipping routines can be sped up by about 
  60% by setting IgnoreOrientation to true. Defaults to false.
* Change: The OffsetPolygon and Area functions have been moved to 
  the new unit - clipper_misc. 

2.99 - 15 January 2011
* Bugfix: Obscure bug in AddPolygon method could cause an endless loop. 

2.8 - 20 November 2010
* Updated: Output polygons which previously shared a common 
  edge are now merged. 
* Changed: The orientation of outer polygons is now clockwise 
  when the display's Y axis is positive downwards (as is 
  typical for most Windows applications). Inner polygons 
  (holes) have the opposite orientation.
* Added: Support module for Cairo Graphics Library (with demo). 
* Updated: C# and C++ demos.

2.522 - 15 October 2010
* Added C# translation (thanks to Olivier Lejeune) and 
  a link to Ruby bindings (thanks to Mike Owens).

2.0 - 30 July 2010
* Clipper now clips using both the Even-Odd (alternate) and 
  Non-Zero (winding) polygon filling rules. (Previously Clipper 
  assumed the Even-Odd rule for polygon filling.)
  
1.4c - 16 June 2010
* Added C++ support for AGG graphics library 
  
1.2s - 2 June 2010
* Added C++ translation of clipper.pas

1.0 - 9 May 2010